Cdi-torque MULTITEST Government User Manual download pdf (Page 83)

6-5

2000-600-02 Manual Loader

D — Linear Bearings

May be slipped over the reaction pins to reduce friction when

testing very small or high resolution electronic wrenches.

E — Reaction Pins

Hold the reaction block in place.

C — Reaction Block

The reaction block is positioned so that the reaction pins

straddle the wrench handle at the hand hold position specified

on the wrench.

Adjustable stops on the reaction pins may be raised

or lowered to level the wrench prior to loading. Do

not place a second stop above the wrench handle. It

is normal for the wrench handle to rise as it levels

itself under load.

IMPORTANT

F — Drive Adaptor

A drive adaptor couples the wrench to the transducer. Low

torque MULTITEST series transducers use an internal-internal

drive adaptor and high torque MULTITEST transducers may use

an adaptor/reducer.

G — Transducer (Accessory)

The loader accepts all MULTITEST series single transducers

directly. An optional 2000-400-02 4-in-1 transducer can be

mounted using a 2000-500-02 adaptor kit. For more

information, refer to Appendix A–Accessories.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 95 96

No comments

Cdi-torque MULTITEST Government User Manual Page 83